New product launch: MPPT controller for wind power generation + external unloader
Release time:
2019/06/15
Wind turbine charging can adopt boost/buck/boost/boost MPPT charging method
Features:
1. Wind turbine charging can adopt boost/buck/boost/boost MPPT charging method
2. The controller reserves RJ45 interface: RS485/RS232 isolation communication interface can be used to realize Internet/GPRS monitoring.
3. The controller has battery temperature compensation function.
4. The controller has its own LED indicator light and can also be connected to an external LCD display.
5. Fan unloading: external unloading resistor (high power) or built-in electronic unloading (low power).
6. The controller has fan speed, current detection and protection functions.
Applicable parameters:
1.12V 24V 48V lithium battery/lead-acid gel battery.
2. The fan adopts boost/buck/boost/boost MPPT charging. When the external unloading resistor is installed, the maximum supported fan power is: 12V400W 24V800W 48V1500W.
When the fan adopts PWM charging and external unloading resistor, the maximum supported fan power is: 12V500W 24V1000W 48V2KW
3. When the fan adopts built-in electronic unloading, the maximum supported fan power is:
Boost/Buck/Boost/Buck MPPT Charging: 12V300W 24V600W 48V800W
PWM charging: 12V500W 24V800W 48V1500W




keywords
: Next Page
Next page:
Related News
CONTACT US
Contact Us
Contact Phone:
Company E-mail:
Company Address:
Max Science Park 1201, Tianshi Road, Shushan District, Hefei City
Product Advisory 1
Product Advisory 2